150ml Laser Marking Spray,Marking Spray for Laser Engraving

Product Name:Laser Marking SprayCapacity:150mlInstructions for use:1. Shake well: Shake the engraving solution thoroughly before opening the cap;2. Surface Preparation: Clean the workpiece surface to ensure it is clean and free of debris;3. Application: Apply a thin, even coat to the surface of the substrate;4. Air Drying: Allow to air dry at room temperature for 5–10 minutes until completely dry before laser engraving;5. Cleanup: After engraving, wipe off any remaining coating with clean water.Things to note:1.The shelf life of unopened, properly sealed products is 12 months.2.When marking curved surfaces, align the curved section with the tool; otherwise, marking may not be possible.3.Apply a thin coat at a time to avoid thick buildup. Changes in ambient temperature and humidity may slightly affect drying time.4.Store unused concentrate in a sealed container at a temperature between 5°C and 35°C. Protect from freezing and direct sunlight, and keep away from heat sources and open flames.

• Laser Marking Spray: This laser marking spray is a pure water-based laser engraving solution that produces high-contrast, permanent black patterns on bare metal surfaces. Compatible with UV laser equipment, it is applied to the substrate surface prior to laser engraving to facilitate the process. The product offers fast drying, ease of use, and can be easily removed with water after laser engraving. It features excellent coverage, is eco-friendly, and is non-toxic and harmless.
• Safe and Quick-Drying: This laser engraving solution is an eco-friendly, single-component paste that is non-toxic, has a mild odor, and is environmentally friendly. It dries within approximately 5–10 minutes after application, allowing for immediate laser engraving.
• Easy to clean: 150-milliliter bottle of engraving solution comes with a sponge brush for applying the solution to the substrate surface before engraving to facilitate the engraving or marking process. After laser engraving is complete, simply rinse with clean water to remove any excess black solution from the item, ensuring smooth and efficient operation even during mass production.
• Easy to use: Shake the engraving solution well before opening the cap. Apply a thin, even coat to the surface of the substrate. Let it sit for 5–10 minutes until the surface is completely dry, then proceed with engraving. After finishing, rinse directly with water.
• Wide range of applications: Suitable for most metals, including stainless steel, brass, and aluminum, as well as various substrates such as wood, acrylic, glass, ceramic, plastic, leather, and stone, to assist in laser marking and engraving.