2PCS USB-C PD3.1 QC Trigger Module, 28V 5A 140W Type-C Female Input Adjustable Voltage 5V/9V/12V/15V/20V/28V PD Sink Board with LED Indicator & Lock Button&Quick-Connect Terminal

Features: Input Port: USB-C Female (PD Sink) Output:DA806R quick-connect terminal Triggerable Voltages: 5V, 9V, 12V, 15V, 20V, 28V Max Output: 28V/5A (140W) Protocol Compatibility: PD2.0 / PD3.0 / PD3.1, QC2.0 / QC3.0, AFC. Dimensions: 51*25*16mm Weight: 9g Operating Temp: -40°C to +85°C Lock function, low power consumption, LED voltage indicator Operating Instructions: Short press: cycle 5V→9V→12V→15V→20V→28V→5V. Long press 3 sec to lock/unlock voltage switching (prevents accidental changes). LED status: Solid light = requested voltage output; Flashing = voltage not supported, module outputs next lower supported voltage. Attentions: This board is a decoy trigger only, cannot boost/buck voltage. Not all USB-C chargers support all voltages. Max spec is 28V/5A(140W), actual values determined by your charger. If the triggered voltage is unavailable, the module steps down to the next lower supported voltage automatically. For >65W or 5A, a certified E-mark USB-C cable is required. When you want to test/use 28V, please make sure the 140W power supply is connected to only one piece type-C cable with E-mark. (If the 140W power supply is connected to 2 pieces or more cables, the power supply output will not reach 28V). Package Contains: 2 x PD3.1 Trigger Module with LED-quick-connect terminal

• 【PD3.1 140W Max – 2 Pack】Two complete decoy modules with full PD3.1/PD3.0, QC, AFC, FCP support. Trigger 5V/9V/12V/15V/20V/28V from any compatible charger. Settings auto-saved for convenience.
• 【28V/5A Higher Power Ready】Supports up to 28V 5A (140W), outperforming typical 20V/100W trigger boards. Actual values determined by your charger. Remember: an E-mark cable is essential for using over 65W.
• 【Misoperation Protection】Long-press locks the desired voltage immediately, preventing accidental changes that could harm your load. Ultra-low standby loss, built for solid everyday use.
• 【Quick Wiring & Intuitive Control】Both modules feature tool-free push-in terminals—just push and connect, no twisting screws. A single button switches voltages; six LEDs display the active output, while flashing alerts you if the voltage isn’t supported by your power supply.
• 【2-Pack Value & 28V Notice】Ideal for powering multiple devices like routers, LEDs, and for lab aging tests. *Important: To trigger 28V, the 140W power supply must be connected to just one E-mark type-C cable. Using two or more cables will cause the output to drop and fail to reach 28V.*