RFID Handheld id Copier RFID Smart id Card Duplicator Used for T5577 id keyfobs and Cards+5pcs T5577 Keychains +5 T5577 Cards

This is a combination of RFID 125kHz replicator products, Buyers must use the product correctly, as compatibility cannot be achieved with different frequencies If the replicator is used normally and cannot read or write devices, then it is a compatibility issue, It's not a problem of product damage, please be aware Firstly, the buyer needs the corresponding frequency for reading and writing, which is compatible with low-frequency products such as T5577. This replicator is compatible with all RFID 125kHz smart products, such as EM4100, EM4305, or T5577. Our combination mainly consists of the T5577 combination product package, which is compatible with products such as T5777. If the buyer needs to be compatible with products such as EM4100 or other frequency devices, they will not be compatible. Please purchase carefully before placing an order. Before purchasing, please note that our combination is based on the T5577 chip, and the RFID duplicator is compatible with all low-frequency RFID 125kHz smart products. The combination product is compatible with T5577 low-frequency or hidden cards. If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chips before purchasing. Please note. Our product is an intelligent product that can read and write without any instructions, and cannot be used directly. Before replacing the device, please use the low-frequency command of the device to write. Read: Place the induction card in the induction area, press and hold the read button (left button), The buzzer will emit a sound by position, the green light will turn on, and the reader is successful. If there is no reflection and only the power light flashes, then the reader is faulty. Copy: After successful reading, place the blank card in the sensing area, hold down the copy button (right-click), the buzzer will sound and the yellow light will turn on, indicating that the copy is successful. If there is no reflection and only the power light flashes, the replication fails. The characteristic of this machine is that it requires two 1.5V AAA batteries with small volume and light weight (56g), Convenient workflow, on-site copying machine can copy parking cards, access cards, switch cards in the market, including small button type, A shaped card. Can be reused, the induction card can be used infinitely, and the replicator function is super powerful, Forcing a card that can only be copied once to be used multiple times in the host

• 1. This is a combination package of RFID 125khz low-frequency replicators. The chip of the product is T5577, which defaults to an empty instruction product and cannot be read or written directly. If you need to test it, please write the instructions from your own 125kHz device into our package product. Please note that the replicator will make a buzzing sound. If the light can be turned on, it means it can work. Due to an empty command in our product, it cannot be used directly. It requires the use of commands to read the device and write it to a card or currency card. <br>
• 2. The main compatible chip for the product portfolio is the T5577 125khz chip, and the RFID replicator is compatible with all low-frequency RFID 125kHz smart products. This combination product is compatible with T5577 low-frequency or hidden cards, with small size, light weight (56g), simple workflow, and allows direct copying, reading, and writing.<br>
• 3. Purchase notice: If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chips before purchasing. This machine can replicate parking cards, access cards, switch cards, including low-frequency places such as small button type and irregular cards in the market.<br>
• 4. Combination products can be reused with just one command and can be replaced infinitely. Please note that the product chip defaults to blank instructions. If writing is required, please first read the 125kHz device command and then write it into the corresponding keychain or card.<br>
• 5. Attention: Our product is an intelligent low-frequency access control product that can read and write without any instructions, but cannot be used directly. Before replacing the device, please write low-frequency commands from the device. The replicator function is very powerful and can only replicate once, forcing it to be trapped in the host for multiple uses.<br>
• 6.Please note: RFID smart products are functional products. For any functional issues with the device, you can directly contact our customer service. Our product is a smart product that can read and write without any instructions and cannot be used directly. Please write low-frequency commands from the device before replacing it. The Repligator function is very powerful and forces a card that can only be replicated once to be used multiple times in the host.<br>
• 7.The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.，Requirements 2 knots 1.5V AAA batteries.<br>
• Compatibility with Frequency: Our Access Control Card Duplicator is only compatible with 125KHz RFID cards. It cannot duplicate 13.56MHz cards. Please ensure that the card you wish to duplicate is within the supported frequency range before purchasing.
• Encryption Limitations: This duplicator is designed to clone unlocked or non-encrypted 125KHz cards only. It cannot copy encrypted cards. If your access control cards are encrypted, this product will not work for duplication.
• Before Purchasing: Please confirm the frequency (125KHz or 13.56MHz) and the encryption status of your access control cards to ensure compatibility with our duplicator. This product is intended for users with some technical understanding of RFID frequencies and security protocols.